Tension Roll Transducer Load Rating Calculator

Calculate the appropriate load rating when the resultant force direction (FT) is above horizontal.

Click To Request A Quote
Estimated Response Time: 2 Hours or Less

Tension Roll Transducer

Product Code Example:
Type Size Diameter Load Rating Connector Options
TR 2 4 100 6 D&T

Size Roll Diameter (inch)
 Load Ratings (lbs) Connector Positions Options Roll Shell & Bearing Weight (lbs)
0 2.25 12, 25, 50, 100 1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR

Alum: 0.16 per inch + 0.3
Steel: 0.45 per inch + 0.3
1 3 12, 25, 50, 100, 150 1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR Alum: 0.30 per inch + 1.4
Steel: 0.88 per inch + 1.4
2 4 25, 50, 100, 200, 400 1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR Alum: 0.54 per inch + 4.3
Steel: 1.56 per inch + 4.3
2 5 25, 50, 100, 200, 400 1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR Alum: 0.69 per inch + 4.3
Steel: 2.00 per inch + 4.3
2 6 25, 50, 100, 200, 400 1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR Alum: 0.85 per inch + 4.3
Steel: 2.44 per inch + 4.3