Tension Roll Transducer Load Rating Calculator
Calculate the appropriate load rating when the resultant force direction (FT) is below horizontal.
Product Code Example:
|
| Type |
Size |
Diameter |
Load Rating |
Connector |
Options |
| TR |
2 |
4 |
100 |
6 |
D&T |
| Size |
Roll Diameter (inch)
|
Load Ratings (lbs) |
Connector Positions |
Options |
Roll Shell & Bearing Weight (lbs)
|
| 0 |
2.25 |
12, 25, 50, 100 |
1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 |
CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR |
Alum: 0.16 per inch + 0.3
Steel: 0.45 per inch + 0.3
|
| 1 |
3 |
12, 25, 50, 100, 150 |
1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 |
CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR |
Alum: 0.30 per inch + 1.4
Steel: 0.88 per inch + 1.4 |
| 2 |
4 |
25, 50, 100, 200, 400 |
1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 |
CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR |
Alum: 0.54 per inch + 4.3
Steel: 1.56 per inch + 4.3 |
| 2 |
5 |
25, 50, 100, 200, 400 |
1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 |
CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR |
Alum: 0.69 per inch + 4.3
Steel: 2.00 per inch + 4.3 |
| 2 |
6 |
25, 50, 100, 200, 400 |
1:30, 3:00, 4:30, 6:00, 7:30, 9:00, 10:30, 12:00 |
CDT, D&T, HC, HCN, NSE, MF, SR, SSR, XR |
Alum: 0.85 per inch + 4.3
Steel: 2.44 per inch + 4.3 |
