Model C Transducer Sizing Calculator

Calculate Net Force for DFE Cartridge-Type Tension Load Cells.

Model C Calculator

Loading...

Min Tension (t): lbs

Max Tension (T): lbs

Load Rating: lbs

Idler Roll Weight (W): lbs

Transducer Position (V): °

Wrap Angle (A): °

Mount Orientation (M): °

Configuration and Options

Cartridge Size:

Shaft Type:

Mounting Style:

Shaft Bushing:

Connector Position:

Mirrored Connector Extended Range (XR) Full Bridge (FB) Labyrinth Seal (LS) M12 A-Code Connector (M12) Metric Mounting Stud (MMS) Vacuum Compensation (VAC) Special Request (Z)

Manipulate the diagram by dragging each letter around the center

2025 Dover Flexo Electronics, Inc.

Transducer Orientation

0 °

Max Recommended Net Force for Selected Load Rating

0.0 lbs

Results

Tension Force (Fₜ)

0.0 lbs

Resultant Net Force

0.0 lbs

Recommended Load Rating

0 lbs

Maximum Possible Tension

0 lbs

Sensing Axis Net Force

0.0 %

Perpendicular Axis Net Force

0.0 %

NOM. Output at Minimum Tension

Standard (3.3 volts excitation)

0.0 mV

Standard (5 volts excitation)

0.0 mV

XR Option (10 volts excitation)

0.0 mV

NOM. Output at Maximum Tension

Standard (3.3 volts excitation)

0.0 mV

Standard (5 volts excitation)

0.0 mV

XR Option (10 volts excitation)

0.0 mV

Resolution

16-Bit

0 steps

0.0 lbs

12-Bit

0 steps

0.0 lbs

With 3.3V excitation

A minimum of 800 steps is required for calibration

Model C Transducer Sizing Calculator

Calculate Net Force for DFE Cartridge-Type Tension Load Cells.

Loading...

Configuration and Options

Manipulate the diagram by dragging each letter around the center

Results

Tension Force (Fₜ)

Resultant Net Force

Recommended Load Rating

Maximum Possible Tension

Sensing Axis Net Force

Perpendicular Axis Net Force

NOM. Output at Minimum Tension

NOM. Output at Maximum Tension

Resolution

N/A