Model F2H / F3H Transducer Sizing Calculator

For Model F load cells with a horizontal force orientation (force parallel to the top plate).

Model F Calculator - Horizontal Force

Connector Position

Loading...

Min Tension (t): lbs

Max Tension (T): lbs

Load Rating: lbs

Idler Roll Weight (W): lbs

Transducer Position (V): °

Wrap Angle (B): °

Resultant Force Angle (Fₜ): °

Configuration and Options

Drill and Tap (D&T) Extended Range Output (XR)

Oversize Top Plate (OTP) Permanent Cable with Tinned Leads (PT)

Manipulate the diagram by dragging each letter around the center

2025 Dover Flexo Electronics, Inc.

Transducer Orientation (E)

0 °

Angle between Top Plate and Direction of Force (D)

0 °

Cannot exceed 45°, recommended limit of 30°

Max Recommended Net Force for Selected Load Rating

0.0 lbs

Results

Tension Force (Fₜ)

0.0 lbs

Resultant Net Force

0.0 lbs

Recommended Load Rating

0 lbs

Maximum Possible Tension

0 lbs

Sensing Axis Net Force

0.0 %

Perpendicular Axis Net Force

0.0 %

NOM. Output at Minimum Tension

Standard (3.3 volts excitation)

0.0 mV

Standard (5 volts excitation)

0.0 mV

XR Option (10 volts excitation)

0.0 mV

NOM. Output at Maximum Tension

Standard (3.3 volts excitation)

0.0 mV

Standard (5 volts excitation)

0.0 mV

XR Option (10 volts excitation)

0.0 mV

Resolution

16-Bit

0 steps

0.0 lbs

12-Bit

0 steps

0.0 lbs

With 3.3V excitation

A minimum of 800 steps is required for calibration

Model F2H / F3H Transducer Sizing Calculator

For Model F load cells with a horizontal force orientation (force parallel to the top plate).

Loading...

Configuration and Options

Manipulate the diagram by dragging each letter around the center

Results

The current force angle is not recommended for this model.

Please consider the Model F V.

Tension Force (Fₜ)

Resultant Net Force

Recommended Load Rating

Maximum Possible Tension

Sensing Axis Net Force

Perpendicular Axis Net Force

NOM. Output at Minimum Tension

NOM. Output at Maximum Tension

Resolution

N/A