Tension Roll® Transducer Sizing Calculator

Calculate Net Force for DFE Tension Roll® Load Cell Systems.

Tension Roll Transducer

Loading...

Min Tension (t): lbs

Max Tension (T): lbs

Load Rating: lbs

Transducer Position (V): °

Wrap Angle (B): °

Configuration and Options

Size:

Roll Material:

Roll Finish:

Roll Coating:

Drill & Tap:

Connector Position:

Roll Length:

Shaft Length:

Conn. End Shaft Ext.:

Free End Shaft Ext.:

Manipulate the diagram by dragging each letter around the center

2025 Dover Flexo Electronics, Inc.

Transducer Orientation

0 °

Roll Shell and Bearing Weight (W)

0 lbs

Max Recommended Net Force for Selected Load Rating

0.0 lbs

Effective Roll Weight

0.0 lbs

Roll Weight as a Percentage of Load Rating

0.0 %

Cannot exceed 95%

Results

Tension Force (Fₜ)

0.0 lbs

Resultant Net Force

0.0 lbs

Recommended Load Rating

0 lbs

Maximum Possible Tension

0 lbs

NOM. Output at Minimum Tension

Standard (3.3 volts excitation)

0.0 mV

Standard (5 volts excitation)

0.0 mV

XR Option (10 volts excitation)

0.0 mV

NOM. Output at Maximum Tension

Standard (3.3 volts excitation)

0.0 mV

Standard (5 volts excitation)

0.0 mV

XR Option (10 volts excitation)

0.0 mV

Minimum Full Scale Tension

Standard (3.3 volts excitation)

0.0 lbs

Standard (5 volts excitation)

0.0 lbs

XR Option (10 volts excitation)

0.0 lbs

With 30 mV of output

Resolution

16-Bit

0 steps

0.0 lbs

12-Bit

0 steps

0.0 lbs

With 3.3V excitation

A minimum of 800 steps is required for calibration