Replacements for CMC / Cleveland Motion Controls Load Cells

Model VNW Series and Model RFA Series tension transducers are the industry standard in cantilevered semiconductor strain gage web tension load cells. Available in up to five mounting styles: Screw, Flange, Pillow-Block, Through-Frame (VNW only) and Piloted-Flange (VNW only). These rugged and refined transducers can be configured to accommodate a variety of pullies or rollers. The RFA and VNW transducers provide load ratings that span from from 10 to 400 lbs (45-1,779 N). All DFE load cells are backed with a 5 year warranty.

Model RFA and VNW transducers are great alternatives to CMC cantilevered CLT load cells in the following configurations:

CMC Model CLT1	DFE (Screw Mount)	DFE (Flange Mount)	DFE (Pillow-Block Mount)
CLTSC-1T	RFA0S	RFA0FL	RFA0PB
CLTEC-1T	N/A	RFA0FL w/Rear Connector	RFA0FL w/Rear Connector
CLTSC-2T	VNW2-S	VNW2-FL	VNW2-PB
CLTEC-2T	N/A	VNW2-FL w/Rear Connector	VNW2-PB w/Rear Connector

Recommended Amplifiers / Signal Conditioners 
TA1 TrueTension™ Amplifier
TA500 EtherNet/IP™ Tension Amplifier

Notes:
1. A DFE amplifier is recommended for best performance

DFE manufactures drop-in replacements or equivalents for: MO-13455, MO-13456, MO-13457, MO-13458, MO-13461, MO-13462, MO-13463, MO-13464, MO-04493, MO-04494, MO-04495, MO-04498, MO-04499, MO-04500

CAPABILITIES
• Dual cantilevered beam for high accuracy
• Load ratings from 10 – 400 lbs (45 – 1,779 N)
• Paired with a DFE amplifier, 0-10 VDC, 4-20 mA and Ethernet connectivity is available

FEATURES & BENEFITS
• 5 year tension-free warranty
• Highly accurate and reliable semiconductor strain gage technology
• Eliminates guess work and allows for the measurement of precise tension in control and monitoring applications
• Helps reduce or eliminate web breakage, stretching, registration and length problems
• Sealed from dust and moisture; seals are recessed, blocking access from potential damage
• Dual cantilever beam provides high strength and accuracy even at low tension
• Temperature compensated for stable output
• CE marked – meets European low voltage (73/23/EEC) and EMC (89/336/EEC) directives
• Stainless steel and aluminum construction for excellent corrosion resistance
• All mounting styles can be rotated to any position for precise orientation