Replacements for Maxcess Magpowr CL Series Cantilevered Load Cells
DFE manufactures replacements for Maxcess Magpowr CL cantilevered load cells with a shaft-centric roller design providing superior tracking, sensitivity and overload protection.
DFE Model NW tension transducers are the industry standard in cantilevered semiconductor strain gage web tension load cells. Available in two mounting styles – screw and flange. Standard roll diameters are available from 2.25 to 3.5 inches, with custom roll diameters (and wall thicknesses) up to 8 inches. NW transducers provide load ratings from 12 to 400 lbs (53-1,779 N). All DFE load cells are backed with a 5 year warranty.
Model NW transducers are great alternatives to Maxcess Magpowr CL Series cantilevered load cells in the following configurations:
| Maxcess Magpowr Model | DFE Replacement1 |
| CL1 | NW0 – Integral 2.25-inch diameter roller, 6 to 16 inches in length NW1 – Integral 3-inch diameter roller, 6 to 16 inches in length |
| CL2 | NW2 – Integral 3.5-inch diameter roller, 7 to 20 inches in length |
Custom NW transducer diameters and lengths also available.
Recommended Amplifiers / Signal Conditioners
TA1 TrueTension™ Amplifier
TA500 EtherNet/IP™ Tension Amplifier
Notes:
1. A DFE amplifier is required for best performance
CAPABILITIES
• Dual cantilevered beam for high accuracy
• Load ratings from 12 – 400 lbs (53 – 1,779 N)
• Paired with a DFE amplifier, 0-10 VDC, 4-20 mA and Ethernet connectivity is available
FEATURES & BENEFITS
• 5 year tension-free warranty
• Highly accurate and reliable semiconductor strain gage technology
• Eliminates guess work and allows for the measurement of precise tension in control and monitoring applications
• Helps reduce or eliminate web breakage, stretching, registration and length problems
• Sealed from dust and moisture; seals are recessed, blocking access from potential damage
• Dual cantilever beam provides high strength and accuracy even at low tension
• Temperature compensated for stable output
• CE marked – meets European low voltage (73/23/EEC) and EMC (89/336/EEC) directives
• Stainless steel and aluminum construction for excellent corrosion resistance
• All mounting styles can be rotated to any position for precise orientation
DFE does not share information with 3rd party advertisers.