TI25 EasyView™ Tension Indicator
A small, general-purpose device for the measurement and display of process web tension.
In addition to amplifying the signal output from tension transducers installed in the web path and displaying actual tension on a 2.5 inch analog meter, the EasyView™ Tension Indicator powers the tension transducer (or transducer pair) and provides an additional isolated 0-10 VDC signal output proportional to tension for a drive, controller or PLC.
For mounting on a wall or machine frame, the EasyView™ Tension Indicator is available in a compact, steel, full enclosure (E). As an alternate configuration there is an open, flat Panel (P) version for mounting into a cutout on an OEM operator panel or cabinet.
Electrical connections are made at a closed terminal strip accessed via conduit through a 7/8 inch hole in the enclosure bottom.
Integrated electrical isolation, package options, ease-of-installation, ease-of-viewing, and low cost make the EasyView™ indicator a popular choice for web tension monitoring or control applications.
EasyView™ operates on 24 VDC power, supplied separately.
BENEFITS
• EasyView™ improves machine operation and productivity by making it easier to run proper tension, gain a higher level of process control and reductions of waste, web breaks, and other web problems
• EasyView™ is a low-cost tension indicator for a transducer-based tension measurement or control system.Unparalleled Output Stability. Drift-free performance even over wide temperature swings for tension monitoring signal stability
• Safe and reliable performance. Integrated Isolation and Circuit stabilization–including built-in noise and surge protection, short-circuit protection, and active current-limiting on the transducer excitation signal
FEATURES
• Small unit-measures just 3.5 inches x 4 inches x 3.5 inches
• Uses Quick-Cal™ push-button Zero and Calibration
• Large 2.5 inch tension readout, analog or digital
• Rugged Steel Enclosure
• Mounts on a wall, machine frame or just about any tight space
• 50:1 calibration range
• Powered by 24 VDC
• I/O connections made via terminal strip
• 0-10 VDC isolated output proportional to tension
• Competitive price-best value for a low cost
OPTIONS
• Digital Meter (DM)
• Non-Standard Meter Scale (NMS)
Do you have more questions about this product?
Complete the form below and a DFE Applications Engineer will contact you shortly.
DFE does not share information with 3rd party advertisers.
N/A